4 of 4 people found the following review helpful.
replacement filter for sears humidifier
By D. Allen
The reason I chose this was because the original filters from sears has had the material they were made of changed to an inferior material. That being said, this filter is constructed better with a aluminum grid to lend support to the filter so it won't collapse after many uses. They are a little tight to install into the humidifier, but with patience they will go in and perform. I have had them in now for a few weeks now and they are fine.
0 of 0 people found the following review helpful.
Fits, sort of Kenmore Model 758-4460
By Gerald H. Peterson
These filters are okay dimensional, but they are too weak physically. They would be much better if framed is some sort of stiffener - just some form of a plastic boarder/brace would work I think.
My unit has an air horn that sits on the top of the filter, putting some downward weight on the filters. Also, the "retaining" edges provided by the Kenmore are far too small,making it difficult to keep the filters in place when reassembling.
Overall the life of the filter is also disappointing. I didn't set a clock on this number, but I believe the total run time could not be more than 20 hours times 30 days.or 600 hours (maybe 100 gallons of water). The output now is very low, as measured by a humidity gauge in an adjacent room, compared to what it did in the first few days it was ran.
I will look for a new dehumidifier before paying the cost of this units short lived filters/wicks again. ,
0 of 0 people found the following review helpful.Good Filters
By Mark Canzian
I bought 2 boxes of filters at SEARS. I opened them up to install them and found 1 of the filters was torn, and none of them really fit correctly, too short! I was back at SEARS within an hour to return the filters. Told them that the quality of their filters is terrible... The quality of the filters I purchased thru Amazon is by far, much better... Better fit & sturdier!
Product Feature
- Fits Sears Kenmore humidifier model 14407, 14413, 14416, 144070, and 144160.
- 2 filters per box (Note: 14413, 14416, 144510 and 144160 need 4 filters).
- Measures approximately 6 1/4" x 11" x 2 3/8".
- Sears Kenmore humidifier wick replacement filters.
- Aftermarket Replacement Filter.
Product Description
These Humidifier wick filters fit Sears Kenmore models 14407, 14413, 14416, 144070, 144071, 29974 and 144160 (Note: 14413, 14416, 144510 and 144160 need 4 filters). There are 2 filters per box and each measures approximately 6 1/4 x 11 x 2 3/8. Honeycomb filtration to trap mineral pollutants found in water and help prevent them from entering your home. Patented rigid support long-lasting design with antimicrobial agent! For optimum performance, replace filter twice a season.
Product Detail
- Amazon Sales Rank: #157408 in Home
- Brand: Sears Kenmore
- Dimensions: .0 pounds
No comments:
Post a Comment